AUDIOTOP CONNECT WORKSTATION CONTACT CLEANING SYSTEM
"The finest Contact Cleaning system we have, direct from Switzerland! This system yields an amazing sonic improvement and is the best of any we have ever tried!"
With the Connect-Workstation you achieve the best possible electric contact
of plugs, switches, tube pins, etc. Outstanding characteristics are the extremely low surface to surface electrical resistance! Further characteristics are: larger and thus more reliable contact areas, less sensitive to aggressive
chemicals and organic solvents, protection from corrosion and wear (particularly
important with only few micrometers thin coating), and withstanding temperatures
up to 180° C (important for tubes).
If you really want to optimize a component or a cable, then you need the Connect-Workstation! We assure you that the interfaces thereafter permit a genuine reference, because the potential of a system goes far beyond the quality
of amplifier or other components alone!
• With the 3-piece Cleaning Set Connect-Workstation, you can reach the best
standard in contact cleaning for power plug connectors, switches, rotary
controllers, metal contact pins, etc
• The exceptional cleaning features are: an extremely low and constant
resistance across the entire audible frequency range, insensitivity to humidity
and aggressive chemicals and organic solvents as well as protection from
corrosion and improved wear resistance. This is especially important especially
where only a few micron of gold coating are used. Stops the build up of
corrosive matter. Temperature resistant up to 180° C (important for tubes).
• With Audiotop Connect, all acoustic characteristics of your equipment are
optimised. Look forward to a new audio adventure!
Audiotop Connect includes:
A three stage cleaning set (workstation) used to improve the conductivity of
Connect1 Basic Cleaner (30ml)
Connect2 Premium Cleaner (30ml)
Connect3 Additive (10ml)
9 Spiral Brushes and extension handle
10 pack of files
200 pack of 100% cotton tissues
Directions for use
We recommend you to clean exterior contacts (permanent connections)
approximately every 8 to 10 months, interior contacts every year. For "open"
tube socket or places with strong air pollution we recommend cleaning in intervals of approximately 6 to 8 months. After cleaning, let your equipment run on low volume for at least half an hour, since altered current flow will need a
new burn-in. On this occasion optimize the positioning of your equipment as we
know from experience how the cables run and/or the equipment stands has a
substantial influence on the quality of the music rendition.
Warning! Disconnect mains before cleaning interior contacts and "open"
tubesockets. We don't take any responsibility for any damage that may be caused
by inappropriate use of our products!