B-Stock Creek Evolution 5350 Integrated Amp (Black)
Normally $1694.99, Only $694.99! You Save $1000!
B-Stock Creek Evolution 5350 Integrated Amp!
Only 1 Available! 1 Year Warranty!
Minor scratches on face plate and top cover. Remote and original shipping/outer box NOT included.
Switchable from 115 Volt 60Hz to 230 Volt 50Hz Operation.
This item not eligible for any further discount offers!
The Evolution 5350 integrated amplifier has been designed to fill the gap left by the Classic range, between the entry level Evolution 2 and the top of the range Destiny. It has borrowed technology from both the Evolution 2 and Classic 5350SE and is styled to match the EVOLUTION 2 CD Player and EVOLUTION Tuner.
Improvements over the Classic 5350 Integrated Amp:
• Greater Power Output 120 watts vs. 90
• Larger Toroidal Power Transformer
• AV Direct Input
• Gorgeous Brushed Aluminum Chassis
• 2 x Identical Modular Power Amp sections for Dual-Mono operation - can be individually and easily removed
• Massive 18 Fin Heat Sink
• High Grade Gold plated Speaker Binding posts with touch-proof covers
• PGA2320 Digitally Controlled Analog Volume Control
• High Current Gold plated relays in the Pre-Amp section
• Large Vacuum Florescent Display (VFD) on the front panel
Creek Audio has developed a completely new high current bi-polar power amplifier to enable it to drive low impedance loudspeakers with modern dynamic music from high resolution sources. This has required a radical approach to enable it to be fitted into a slim-line case.
Each power amp is now built as a module, using a high proportion of Surface-Mount components, on a double sided PCB, bolted to a massive 18 fin heatsink. This means both channels are identical and can be fitted and removed easily for servicing if required. The power amp topology includes a cascoded differential voltage amplifier and MOS-FET current drive stage feeding a double Darlington output stage with four high-current bi-polar transistors to produce a very powerful amplifier capable of driving the most demanding of loads, with high resolution and accuracy. DC stability is maintained by a servo amplifier that rejects DC and allows the amplifier to be coupled directly without capacitors.
In a further development of the Evolution 5350 integrated amplifier's pre-amplifier section, 5 inputs are selectable by high current gold plated relays and switchable access to the power amp allows the Evolution 5350 to be driven directly by the front channels of a 5.1 AV receiver. The standard Creek plug-in Phono pre-amp is also featured. A high-grade PGA2320 digitally controlled analogue volume control circuit together with OPA604 Op-Amps are used to provide a pre-amp with higher overload margin and lower distortion.
To enable 2 x 200 Watts into 4 Ohms to be produced from a small case, Creek has developed a massive power supply using a high grade 350 Watt toroidal mains transformer that powers left and right power amp channels separately, plus pre-amp and digital circuits.
To keep the power amps operating safely, they are monitored by discrete transistor circuitry to protect against over-current demand, short circuits, over-temperature and DC offsets. Relays mute the input and separate the loudspeaker outputs in case of faults.
The Evolution 5350 is operated from the front panel by rotary digital controls for input selection and volume control plus push buttons for Tape and Speaker selection, Mute and Power On/Off.
Gold plated input and output sockets have been chosen to provide a good connection and appearance for a product at its price point. Loudspeakers are connected by up to 2 sets of high current gold plated binding posts, with plastic touch-proof covers. The amplifier also has a headphone socket; something which is becoming an increasingly rare feature in modern amplifiers.
A large vacuum fluorescent display (VFD) on the front panel indicates the state of the amplifier. Input selection, volume position and loudspeaker connection is displayed through a blue filter.
Mains is supplied via a fused, 3 pin IEC chassis plug, mains voltage selector and 2 pole high current switch on the front panel. A high quality power cord is supplied with suitable mains plug for the country of use.
Power Supply: Switchable, Universal Input 115V-230V AC, 50-60Hz
Power in to 8 Ohm both channel driven: 120 Watts
Power in to 4 Ohm one channel driven: 200 Watts
Max Current: Greater Than 25 Amps
THD: Less Than 0.02% 20Hz - 20Khz
Frequency Response: 1Hz - 50KHz - 1dB
Slew Rate: Greater Than 30 V per µS
Input Sensitivity: 500mV
Separation: Greater Than 60dB
Signal to Noise: Greater Than 90dB
MM Phono Sensitivity & Impedance: 3.5mV 47k Ohm (when fitted)
MC Phono Sensitivity & Impedance: 0.75mV 1k Ohm (when fitted)
Outputs: 2 pairs of speakers
Headphone output: Yes
A/B speaker switch: Yes
Consumption (at idle): 50 Watts
Consumption (at full power): 500 Watts
Weight: 10.5Kgs 21lbs
Size: W/H/D 430 x 90 x 340mm
17 x 3.5 x 15.5ins