Buy 4 or more and pay only $29.99 each! Buy 8 or more and pay only $27.99 each!
The Cool Damper is a radical new device for the tube accessory industry from
EAT – EuroAudioTeam. This beautifully crafted audio product offers much more
than simply adding a new styling twist to your valves, it also brings
exceptional acoustic performance and function to your system by delivering sound
that redefines the tube dampening category.
Carefully chosen materials for our Cool Damper device allows using it as a truly
effective vibration-consuming damper. This results in reduced distortion from
the tube circuit, as well as vastly reducing the tendency of most vacuum tubes
to act in a microphonic manner. In addition, the sound from a component
utilizing Cool Dampers can be heard to have more controlled and deeper bass, a
cleaner sound stage, crisper and greater dynamic range, and better focus of the
entire sound field.
The Cool Damper also reduces the operating temperature of the vacuum tube by about 10%, which of course acts to appreciably extend the lifetime of the tube.
The Cool Damper is a result of many years of rigorous research and development.
This high-fidelity, consumer-friendly product is easy to install, and fabulously
simple in design. We found, from all tested materials, that the most suitable is
a relatively soft aluminum extrusion coated with a special blended mix of Teflon
and Carbon composite PTFE. The precise shapes of the EAT Cool Dampers are
finished with long-lasting anodic oxidation colours. This makes these cooling
rings an aesthetically attractive, as well as functional, accessory for your
valued vacuum tube equipment.
For flexible and easily detachable contact of the aluminum body to the sometimes
erratic cylindrical surfaces of various tubes, we use six special carbon-teflon
composite stripes (V profile). Appropriate design and materials of the Cool
Dampers compensate for the naturally resonant tendencies of both glass and
aluminum, and work to transform active vibrational energy into thermal energy,
which is then dissipated as heat radiation.
Tube dampers in one form or another have been around for many years, but these
from EAT are so much more effective than any previous efforts that they deserve
to be auditioned on their own merit.
Actual testimonial from an Elusive Disc, inc. customer regarding the Music Hall EAT Vacuum Tube Cool Dampers: "OK, I admit that I am an audiophile tweaker. Many times I have acquired items that at least had a technical basis, but really were not that significant in terms of audible improvements. So when I saw the ad for the Music Hall EAT vacuum tube dampers, I was somewhat drawn to the idea. I had paid extra dollars to obtain very low noise, very low microphonic driver tubes, have tried various tube dampers over the years (remember the ones from Florence, Italy, with the springs, the ebony and the brass cone?) and currently use Halo tube dampers, that at least were not spring-loaded. When you ran the sale on the Music Hall EAT, I succumbed to that elusive siren of audio nirvana and bought four."
"I really didn't think that much would happen other than a new visible and interesting tweak. How wrong I was."
"I could barely believe my ears when I easily replaced the Halos with the EATs. Everything you have stated about the audible improvements are validated and then some. I had no idea how much "noise" and distortion was present prior to the Music Hall EAT dampers. While my system was very involving, with good soundstaging, base and timbre control, and dynamics, the EATs easily could be compared to a megabuck upgrade in power cords and interconnects. I just wanted to take the time to thank you for promoting a real significant audio advancement. I can't imagine anyone with tube gear that would not benefit from such a modest investment for such a major improvement." - Jack S.
1 5/16" (D) x 15/16" (T)
How it works?
1. Dampers are from the factory preinstalled. This means 6 pieces of the V
profiles are positioned in the middle of the hexagon.
2. By moving the V profiles along the face away from the corner it is possible
to move it closer to the center of the hexagon and thus the valve wall. By this
simple expedient, tubes from 19 mm to 22 mm in diameter can be accommodated,
which covers most eventualities.
3. Diameters of the most valves are usually smaller on the top of the erratic
glass envelope than on the bottom. By sliding the valve over damper in an up
side down position (see picture on the right) you can easily install it. In a
case, damper slides down the glass or is to narrow just change position of the V
profiles (see pictures A, and C).
Where do you use EAT Cool Dampers?
Inner side of the damper has 3 × 6 channels for a wide range of diameters from
19.5 to 22 mm. This means it fits to the following valves:
• 12AT7: ECC81, 6201, E81CC, ECC801, B309, 6060, 6679, 7728, CV455, CV2016,
• 12AU7: ECC82, E82CC, 6067, B339, 5814, 6189, 6680, 7730, CV491, CV8155
• 12AX7: ECC83, E83CC, ECC803, 7025, 5751, 7058, 7729, 6681, CV492, CV8156
• 6DJ8: ECC88, E88CC, 6922, EL84, EF86 and many others.