Expressimo Audio The LIFT The LIFT (For Music Hall & Pro-Ject)
The LIFT will NOT work with the Music Hall MMF 2 Series Turntables or turntables with a platter thickness of less than 1 inch.
The last groove is NOT a good place for your stylus!
The LIFT is a Must Have Accessory!
This lift is specially designed for Music Hall and Pro-Ject turntables!
This is a MUST HAVE! If you've ever gotten up out of the sweet spot, have fallen
asleep, enjoy listening to music while eating, or just forget--this is the
product for you. It will save your cartridge stylus. The last groove is NOT a
good place for your stylus.
The difference between the original LIFT and the one used for the Pro-Ject and
Music Hall turntables is that the foot stand has a smaller diameter and the back
of the swing arm is lighter.
There is an important advantage to lifting the arm up at a record's end. It
eliminates excessive vinyl build up on the sides of the stylus and this is why.
A stylus riding that last groove more then twice is creating heat, (at the
stylus point are tons of pressure producing this heat) thus melting the vinyl.
Extra rotation, extra heat. Once this heavy build up occurs, it must be
completely removed before the next play. A dirty stylus will damage the grooves
therefore changing the sound. At least an hour should pass before playing the
same record over again, this allows the vinyl to resume its shape.
In Stereophile Magazine's original review for The LIFT, Michael Fremer said:
"Once properly adjusted it worked flawlessly and reliably, lifting the arm off
the record gently and without surprises."
The Expressimo Audio Brass Tonearm LIFT is the solution to this problem.
Machined from brass and polished to a gold luster, the LIFT easily installs
between the tonearm and the platter on the plinth. As the tonearm hits the last
lead groove of the record, it trips the LIFT which raises and suspends the
tonearm in the air. With a stable, heavy circular base, the LIFT will mount on
The LIFT is specifically designed the Music Hall and Pro-Ject Turntables.
Simply and Easy Set Up! The LIFT comes with a small allen wrench and small
velcro strip. The LIFT is made for platters 1" to 1" 1/2 tall, but with a simple
spacer you can put it on any platter. What you will need is a small piece of
double sided tape to hold down the LIFT to the plinth.
The center point of the LIFT is just above (1/16" to 1/8") the top of the vinyl.
You can adjust that by unloosening the set screw and moving the foot stand up or
down. This will be how high it LIFTs your arm.
Please use your cartridge guard and an old record when setting up the LIFT. Some
cartridges weigh 6 to 12 grams plus, so you will need to adjust the head weight
of the LIFT accordingly.
Set the arm at the last groove and position the LIFT touching the arm. Once you
determine final resting place for the LIFT, check to make sure it lifts
correctly, place a piece of double sided tape underneath the LIFT base to adhere
it to your plinth.