Elusive Disc is proud to bring you the new & improved for 2007 Finite Elemente Ceraballs!
Elusive Disc is proud to bring you the new & improved for 2007 Finite Elemente Ceraballs! This redesigned version of the acclaimed Ceraball is larger and more stable than the original version making them more versatile and easier to use. The Finite Elemente Ceraballs can now hold up to 88lbs per unit! The Ceraball also features a threaded inset so that you will now be able to replace spikes or older feet on existing speakers or equipment racks. The new and improved Ceraball brings better resolution, better soundstage, better dynamics, and better music to your life.
The Ceraball isolation devices are made by German HiFi Rack manufacturer Finite Elemente (who also happen to build some of the world's most sophisticated component racks!). The Ceraball consists of an aluminum base and cap, separated by a ceramic ball bearing. Despite consisting of two entirely separate parts, they are handled as one making their use even easier. There is a rubber O-ring around the shaft of the base, damping any wobble between it and the top-cap which holds the Ceraball together (NO MORE lost ball-bearings!). The first thing you notice about the Ceraball is just how solid they feel. Despite being only a little over an inch tall, they are surprisingly solid and the small diameter of the top-surface helps you achieve perfect contact with the base of your component. Larger feet often suffer interference from perforated grilles, screw heads or odd shaped bases, but the Ceraballs are simplicity itself to use. They are beautifully finished in silver alloy or black. Place three or four Ceraball feet under any source, from pre-amps to turntables to CD/SACD/DVD transports and you will be astonished at the improvements they produce. Increased clarity and dynamics, tighter, more controlled bass response, a smoother top-end and an increased sense of space around instruments will be immediately apparent. 100% Elusive Disc Guaranteed, so try a few sets in your system today and put the Ceraball to the test!
The Top Cap: Ceraball is to be placed directly under the component’s bottom plate (NOT under its original feet). The principle of CERABALL° lies in the long-standing experience in designing resonance optimized audio furniture. Interfering resonances (from i.e. the 60Hz vibration caused by mains supply, music playback, etc.) are deliberately deflected. Suitable for ALL audio components and furniture systems.
1. Precision moulded high-tech ceramic ball made in U.S.A. for definitive contact and fast resonance transfer
2. Elastomer collar for the centering and damping of the top cap
3. Base and top cap precision machined from solid aluminum with high densified and hard anodised surface
The base: Extended contact area for effective resonance transfer. Ceraball works best within resonance exposed areas of the component’s bottom plate (near i.e. the mains supply).
Load Capacity: 88lbs Each
Height: 1 3/16"
Base: 1 3/8" radius
Top: 3/4" radius
Chassis Material: Anodized Aluminum
Ball Bearing Material: Ceramic
Ceraball Base: M6 Threaded (includes both M6 & M8 bolts)