VPI MW-1 Cyclone Record Cleaner (120V)
This product can only be shipped to U.S. addresses.
The new VPI MW-1 Cyclone Record Cleaning Machine!
The Cyclone features vacuuming in both directions, really cleaning out the record grooves. An all aluminum machine, the VPI MW-1 Cyclone Record Cleaning Machine is quieter than the Award Winning HW-16.5 plus it has a platter that can be pressed on quite hard for solid cleaning!
The VPI MW-1 Cyclone was created to pay tribute to the HW-16.5, which started VPI, and in honor of the passing of the torch from Harry to Mat Weisfeld.
The MW-1 Cyclone is the first and only record cleaning machine (that we are aware of) that vacuums dirt off the record clockwise and counter clockwise to really clean out the grooves. This motor is a high torque 18 RPM forward and reverse turntable motor. The MW-1 is housed in an aluminum water proof case with a welded stainless steel water tank which drains out the back. The bidirectional turntable motor allows for you to scrub and vacuum in both directions for the ultimate in deep cleaning. Professional quality toggle switches with 100 thousand cycle life.
The turntable motor is designed to last decades and is inspired by the original HW 16 which is still working 30 years later. The vacuum motor so powerful it rated to lift mercury 120 inches pulling the grim off your records. All components of heavy duty industry quality and includes a 2 inch delrin record clamp. In addition, the MW-1 Cyclone is quieter than the HW-16.5 and more durable with its aluminum casing. For good measure, VPI took the final model and kicked it down a flight of steps. That model is currently cleaning records in their listening room and can clean your record in under 30 seconds!
• Aluminum water proof housing
• Ability to turn the motor in both directions while the vacuum is on
• High torque 18 RPM forward and reverse turntable motor
• The motor turns on the outside of the platter rather than the center so you can press as hard as you like with your brush without worrying about bending/breaking the center motor shaft.
• 2-inch Delrin Knurled Record Clamp
• Removable Dust Cover
• Size: 15 1/2" x 14 1/4" x 9"